IRWIN SPEEDBOR
Vise Grip HAN1449 Hanson 1449 Tap 9/16"-18 NF Plug, for Tap Die Extraction
9/16 TAP18 NF PLUG
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountD1 7/16HX9/16-18
The Hanson 6849 9/16"-18" 1-7/16" Nf Sh Die for Tap Die Extraction will help you extract screw and bolt heads.
Vise Grip 1-7/16 inch Sh Non-Fouling Head Die comes in a 9/16-18 thread to fit tapered plugs. Features 1-piece construction for strength and excellent durability.
The Genuine Hanson 6849 Tap Extraction Die is ideal for removing broken taps from threads up to 1-7/16" in diameter. It can also be used as a tap holding die to drive tapping screws into tapped holes. This 9/16"- 18 die is used with a 7/16"-18 shank and features a 1-7/16" nut sleeve.
This quality 6849 Die is made of durable hardened steel for use on 9/16-18 threads. It is 0.982" (25.20 mm) long and has 1.235" (31.20mm) total length (including bumpers).
The Vise-Grip Hanson 6849 Die Set 9/16" screw size, 1-7/16" hex shank, with the die and the extractor tool make for easy removal of broken tap threads.
With an all-steel design and sure grip handle, the Hanson 6849 Tap Die Extractor is ideal for removing stubborn screws that have become stripped or rusted. A 9/16" and 1-7/16" die are included along with a 5/8" wrench for use on a 1/4" hex drive. This extractor is optimal for use on damaged screws that feature damaged or stripped heads and come equipped with a hardened cutting tip for precise removal.
This die withstands the high torque required to extract large taps from deep holes. Heat treated to withstand repeated impacts. It can be used with a tap handle or wrench.
D1 7/16HX9/16-18
The Hanson 6849 9/16"-18" 1-7/16" Nf Sh Die for Tap Die Extraction will help you extract screw and bolt heads.
Vise Grip 1-7/16 inch Sh Non-Fouling Head Die comes in a 9/16-18 thread to fit tapered plugs. Features 1-piece construction for strength and excellent durability.
The Genuine Hanson 6849 Tap Extraction Die is ideal for removing broken taps from threads up to 1-7/16" in diameter. It can also be used as a tap holding die to drive tapping screws into tapped holes. This 9/16"- 18 die is used with a 7/16"-18 shank and features a 1-7/16" nut sleeve.
This quality 6849 Die is made of durable hardened steel for use on 9/16-18 threads. It is 0.982" (25.20 mm) long and has 1.235" (31.20mm) total length (including bumpers).
The Vise-Grip Hanson 6849 Die Set 9/16" screw size, 1-7/16" hex shank, with the die and the extractor tool make for easy removal of broken tap threads.
With an all-steel design and sure grip handle, the Hanson 6849 Tap Die Extractor is ideal for removing stubborn screws that have become stripped or rusted. A 9/16" and 1-7/16" die are included along with a 5/8" wrench for use on a 1/4" hex drive. This extractor is optimal for use on damaged screws that feature damaged or stripped heads and come equipped with a hardened cutting tip for precise removal.
This die withstands the high torque required to extract large taps from deep holes. Heat treated to withstand repeated impacts. It can be used with a tap handle or wrench.