DS-35 for 1-1/2in Adj Round Di
Hanson HAN12435 Adjustable Guide Die Stocks, DS-35 For 1-1/2in Adj Round Dies, Model#: DS-35 For 1-1/2in Adj Round Dies, Type: Adjustable Guide Die Stocks
The Adjustable Guide Die Stock 35 enables you to make dies that form 1-1/2in sections of round, square and oval tubing up to 3/8in wall. This die stock is good for extruding or bending pipe. You can cut the pipe at different angles as well. The machined guide and hardened tube teeth allow you to finish a smoother bend as well.
The DS-35 features a universal quick-change guide die mounting system with 5/8in arbor, an interchangeable sub base for easy height adjustments and 40 positions on 4in travel. The die stocks are precision cast from premium alloy steel, ground and hardened for maximum strength.
The 1-1/2" Adjustable Guide Die Stock, HAN12435, is just what you need to precisely cut round and oval patterns from sheet metal. Because this die stock adjusts from 1-1/2" to 2", you can cut round stock up to 1" larger than the actual ring diameter.
This tool dies are precision machined hardened steel dies that fit all standard 1-1/2" round guide sleeves. They will work with any 3/8"-diameter advanced mandrel made for Vise-Grip presses, as well as the small diameter mandrel (#383) that comes with the Vise-Grip die stock set.
Hanson Adjustable Guide Die Stocks raise the blade to cut threads on round or hex holes. For 55% more thread depth1, these die stocks can be clamped on a work piece, or in a vise and moved back and forth parallel to the hole for forming threads of straight lengths. A microadjuster allows for precise thread setting.
This Dies stocks is designed for the Vise-Grip pliers. It has a series of preset holes for quick and easy adjustment to differing sizes of single-cord and multi-cord strands, such as those found on telephone, electric, and cable TV lines. No other die stock is more precise than the Vise-Grip adjustable guide die stock.
DS-35 for 1-1/2in Adj Round Di
Hanson HAN12435 Adjustable Guide Die Stocks, DS-35 For 1-1/2in Adj Round Dies, Model#: DS-35 For 1-1/2in Adj Round Dies, Type: Adjustable Guide Die Stocks
The Adjustable Guide Die Stock 35 enables you to make dies that form 1-1/2in sections of round, square and oval tubing up to 3/8in wall. This die stock is good for extruding or bending pipe. You can cut the pipe at different angles as well. The machined guide and hardened tube teeth allow you to finish a smoother bend as well.
The DS-35 features a universal quick-change guide die mounting system with 5/8in arbor, an interchangeable sub base for easy height adjustments and 40 positions on 4in travel. The die stocks are precision cast from premium alloy steel, ground and hardened for maximum strength.
The 1-1/2" Adjustable Guide Die Stock, HAN12435, is just what you need to precisely cut round and oval patterns from sheet metal. Because this die stock adjusts from 1-1/2" to 2", you can cut round stock up to 1" larger than the actual ring diameter.
This tool dies are precision machined hardened steel dies that fit all standard 1-1/2" round guide sleeves. They will work with any 3/8"-diameter advanced mandrel made for Vise-Grip presses, as well as the small diameter mandrel (#383) that comes with the Vise-Grip die stock set.
Hanson Adjustable Guide Die Stocks raise the blade to cut threads on round or hex holes. For 55% more thread depth1, these die stocks can be clamped on a work piece, or in a vise and moved back and forth parallel to the hole for forming threads of straight lengths. A microadjuster allows for precise thread setting.
This Dies stocks is designed for the Vise-Grip pliers. It has a series of preset holes for quick and easy adjustment to differing sizes of single-cord and multi-cord strands, such as those found on telephone, electric, and cable TV lines. No other die stock is more precise than the Vise-Grip adjustable guide die stock.
