Mo-Clamp MOC5815 Moclamp MCL- Down Pulley/snap Block Assembly

Down Pulley / Snap Block Assembly

This Down Pulley / Snap Block Assembly is an essential component to the installation of any MOCLAMP. This part is designed for use with MOCLAMPS that mount to wood or metal structures and supports a host of applications, including lighting, ropes, banners and signs, safety entrapment devices for window washing work platforms, small power lines or cables that pull away from structures during high winds and more.

This is MOCLAMP's new replacement down pulley and snap block assembly for the Mo-Clamp 5800 series.

The Mo-Clamp Down Pulley/Snap Block Assembly allows a worker to tie off to an existing line that has been placed by the crane operator. This saves time when installing rigging for power, telephone and communication lines. The clamp is designed for use with a 5/8" rope.

The Mo-Clamp MOC5815 is a down pulley/snap block assembly that is designed to fit any rope up to 9mm diameter. It has a manual ratchet system for easy operation. This system will keep the right amount of tension on the rope while you're working taking all the pressure off of your body.

The Mo-Clamp MOC5815 MocLamp MCL down pulley/snap block assembly is a reliable piece of hardware that will never let you down. This kind of pulley system is often used for raising and lowering scaffolding with cable or rope, but it's also an affordable accessory for small yards and gardens. It can also be used for other all the things that regular rope pulleys can be used for, such as wire rope, chains, cables, etc., except it's safer than a traditional pulley system.

The MoClamp MOC5815 Pulley/Snap Block assembly is comprised of a pulley mounted on a 12 inch (305 mm) diameter, 5/16 inch (8 mm) wall tubing (20 ft. of 3/8" x 5/16" Galvanized Aircraft Cable not included), a downward facing retainer snap, and an assembly kit consisting of net clamps and mounting hardware.

The MOC5815-27 is a pulley block assembly that uses a 5/8" wire rope clip. It consists of an alloy steel carabiner, aluminum snap hook, and 1680 steel snap carabiner snap block. The MOC5815-27 can be used on ropes from 1/2" to 3/4" in diameter and works with the MOC51210A downhaul pulley to haul loads up to 4000 lbs. It has a breaking strength of 8200 lbs. This snap block meets the requirement for an EN542 Part 2 compliant snap block when used in combination with

Down Pulley / Snap Block Assembly

This Down Pulley / Snap Block Assembly is an essential component to the installation of any MOCLAMP. This part is designed for use with MOCLAMPS that mount to wood or metal structures and supports a host of applications, including lighting, ropes, banners and signs, safety entrapment devices for window washing work platforms, small power lines or cables that pull away from structures during high winds and more.

This is MOCLAMP's new replacement down pulley and snap block assembly for the Mo-Clamp 5800 series.

The Mo-Clamp Down Pulley/Snap Block Assembly allows a worker to tie off to an existing line that has been placed by the crane operator. This saves time when installing rigging for power, telephone and communication lines. The clamp is designed for use with a 5/8" rope.

The Mo-Clamp MOC5815 is a down pulley/snap block assembly that is designed to fit any rope up to 9mm diameter. It has a manual ratchet system for easy operation. This system will keep the right amount of tension on the rope while you're working taking all the pressure off of your body.

The Mo-Clamp MOC5815 MocLamp MCL down pulley/snap block assembly is a reliable piece of hardware that will never let you down. This kind of pulley system is often used for raising and lowering scaffolding with cable or rope, but it's also an affordable accessory for small yards and gardens. It can also be used for other all the things that regular rope pulleys can be used for, such as wire rope, chains, cables, etc., except it's safer than a traditional pulley system.

The MoClamp MOC5815 Pulley/Snap Block assembly is comprised of a pulley mounted on a 12 inch (305 mm) diameter, 5/16 inch (8 mm) wall tubing (20 ft. of 3/8" x 5/16" Galvanized Aircraft Cable not included), a downward facing retainer snap, and an assembly kit consisting of net clamps and mounting hardware.

The MOC5815-27 is a pulley block assembly that uses a 5/8" wire rope clip. It consists of an alloy steel carabiner, aluminum snap hook, and 1680 steel snap carabiner snap block. The MOC5815-27 can be used on ropes from 1/2" to 3/4" in diameter and works with the MOC51210A downhaul pulley to haul loads up to 4000 lbs. It has a breaking strength of 8200 lbs. This snap block meets the requirement for an EN542 Part 2 compliant snap block when used in combination with