Grip On KNP4411J4 Knipex Internal Straight Retaining Ring Pliers 12.75-Inch

Circlip Pliers For Internal Circlips

We are pleased to introduce our new Knipex Circlip Pliers for internal circlips with nippers. This tool is aimed at raising the standards of efficiency in the global automotive industry. With their completely redesigned head, these pliers for internal circlips retain their gripping strength in both clockwise and counterclockwise positions. The integrated adjusting collar makes it possible to adjust the clamping force individually among nine steps with a torque of up to 200 Nm, or it can be locked for permanent use in the particular setting.

Circlip pliers are designed for internal circlip rings. The pliers steel jaws securely grip the internal circlips when the ring has been opened due to excessive wear and tear. If you need to make repairs, these pliers are the answer.

Grasp on to 45mm internal circlips with the Knipex straight retainer ring pliers. This 12.75-inch tool features serrated jaws that provide a more gripping surface. The 360-degree swivel through joint unleashes the full potential of the length of this tool when you are working in tight spaces. The forged tip is square so it can be used with flat and round internal retaining rings for service in harsh environments. Made from rust-resistant, high-grade stainless steel, this gripping circlip pliers possesses a balance between hardness and elasticity to withstand tough use.

The internal straight retaining ring pliers KNP4411J4 from Knipex is designed to work with internal retaining rings. This strong and hard cutting tool is made from drop forged chrome-vanadium steel and features oil-hardened cutting edges with beveled tips for added durability. The grip of the pliers grips tightly in the groove of the circlip, eliminating twisting and slipping.

Easy access to internal circlips. Adjust, lock, install or remove at right or left hand. Heat treated. Chrome plated finish ensures corrosion resistance and maximum hardness.

Internal retaining rings are used to keep the circlips from moving on the outer diameter of the component. The special feature of these pliers is that they can be used with retaining rings that have a locking wire. This increases their functionality.

The gripping tool is ideal for clamping internal straight retaining rings (GJ/GG/GGW) to hold the spring steel core with diameter 3.1mm to 10mm wide, especially in the event of an accident during assembly or dismantling with regard to the danger of high-speed cutting edges. The pliers also offer good stability and high-class processing and can be used for other applications as well, due to the underlined Polyamide PA66 Material, e.g. installation of snap ring plier PJKS and JLCK Plus Circlip Pliers. Pliers part number: KNP 44 11

Circlip Pliers For Internal Circlips

We are pleased to introduce our new Knipex Circlip Pliers for internal circlips with nippers. This tool is aimed at raising the standards of efficiency in the global automotive industry. With their completely redesigned head, these pliers for internal circlips retain their gripping strength in both clockwise and counterclockwise positions. The integrated adjusting collar makes it possible to adjust the clamping force individually among nine steps with a torque of up to 200 Nm, or it can be locked for permanent use in the particular setting.

Circlip pliers are designed for internal circlip rings. The pliers steel jaws securely grip the internal circlips when the ring has been opened due to excessive wear and tear. If you need to make repairs, these pliers are the answer.

Grasp on to 45mm internal circlips with the Knipex straight retainer ring pliers. This 12.75-inch tool features serrated jaws that provide a more gripping surface. The 360-degree swivel through joint unleashes the full potential of the length of this tool when you are working in tight spaces. The forged tip is square so it can be used with flat and round internal retaining rings for service in harsh environments. Made from rust-resistant, high-grade stainless steel, this gripping circlip pliers possesses a balance between hardness and elasticity to withstand tough use.

The internal straight retaining ring pliers KNP4411J4 from Knipex is designed to work with internal retaining rings. This strong and hard cutting tool is made from drop forged chrome-vanadium steel and features oil-hardened cutting edges with beveled tips for added durability. The grip of the pliers grips tightly in the groove of the circlip, eliminating twisting and slipping.

Easy access to internal circlips. Adjust, lock, install or remove at right or left hand. Heat treated. Chrome plated finish ensures corrosion resistance and maximum hardness.

Internal retaining rings are used to keep the circlips from moving on the outer diameter of the component. The special feature of these pliers is that they can be used with retaining rings that have a locking wire. This increases their functionality.

The gripping tool is ideal for clamping internal straight retaining rings (GJ/GG/GGW) to hold the spring steel core with diameter 3.1mm to 10mm wide, especially in the event of an accident during assembly or dismantling with regard to the danger of high-speed cutting edges. The pliers also offer good stability and high-class processing and can be used for other applications as well, due to the underlined Polyamide PA66 Material, e.g. installation of snap ring plier PJKS and JLCK Plus Circlip Pliers. Pliers part number: KNP 44 11