Vise Grip VGPUN2T Unibit #2 Tit 3/16-1/2"

UNIBIT #2 TIT 3/16-1/2"

The Unibit #2 Tit 3/16-1/2" fits into recesses or areas with limited access, allowing you to tighten and loosen screws, bolts, and fittings that otherwise would be difficult to reach. The tool features a combination square shank for use in power drills as well as 2 keyholes so it can be hung from a nail or screw as a wall display when not in use.

The Vise-Grip® VGPUN2T Unibit #2 Tit 3/16-1/2" is used for a wide variety of applications and materials. It can be used on wood, metal, plastic or fiberglass. It cuts through soft metals such as aluminum and brass. The teeth are heat treated to resist wear and breakage.

The Vise-Grip Vice-Grips 2 Ton Unibit is a necessity for any tool box. This fit works perfectly in the Vise-grip pliers range of 3 3/16" to 3 5/8" giving you the option to take it anywhere in your tool box without worrying if it will fit. It has got the durability you would expect from a Vise-Grip and it's just as strong as the original Unibit Tool that is available from Snap On Tools.

A favorite tool of mechanics for more than 50 years, the Vise-Grip Unibit is a must-have for all tool boxes. It's ideal for cutting small holes in sheet metal and wood for mounting hinges, light switches and hardware. It also removes broken studs and damaged rivets to repair furniture or vehicle trim. Measures just 5-3/4" long with a 1/4" hex shank.

The Vise-Grip Unibit Head Provides Drill Bit and Bur Tip Options for All Screwdriving Applications from Removable to Fixed Fastener.

The Vise-Grip Universal Unibit is a quick-change chucking unibit set for a broad range of hardwoods, softwoods, and man-made materials. The set consists of the drill body with five carbide cutting edges and one hardened-steel reamer insert. The cutting edges are overdrill cut for increased durability. Set screws provide positive cutter indexing.

The TIT bits are designed to cut tapered or straight slots in wood, plastics, and metal. They are ideal for slotting hinges and splines. The nominal width of the cutter is 1/8" (3.2mm).

UNIBIT #2 TIT 3/16-1/2"

The Unibit #2 Tit 3/16-1/2" fits into recesses or areas with limited access, allowing you to tighten and loosen screws, bolts, and fittings that otherwise would be difficult to reach. The tool features a combination square shank for use in power drills as well as 2 keyholes so it can be hung from a nail or screw as a wall display when not in use.

The Vise-Grip® VGPUN2T Unibit #2 Tit 3/16-1/2" is used for a wide variety of applications and materials. It can be used on wood, metal, plastic or fiberglass. It cuts through soft metals such as aluminum and brass. The teeth are heat treated to resist wear and breakage.

The Vise-Grip Vice-Grips 2 Ton Unibit is a necessity for any tool box. This fit works perfectly in the Vise-grip pliers range of 3 3/16" to 3 5/8" giving you the option to take it anywhere in your tool box without worrying if it will fit. It has got the durability you would expect from a Vise-Grip and it's just as strong as the original Unibit Tool that is available from Snap On Tools.

A favorite tool of mechanics for more than 50 years, the Vise-Grip Unibit is a must-have for all tool boxes. It's ideal for cutting small holes in sheet metal and wood for mounting hinges, light switches and hardware. It also removes broken studs and damaged rivets to repair furniture or vehicle trim. Measures just 5-3/4" long with a 1/4" hex shank.

The Vise-Grip Unibit Head Provides Drill Bit and Bur Tip Options for All Screwdriving Applications from Removable to Fixed Fastener.

The Vise-Grip Universal Unibit is a quick-change chucking unibit set for a broad range of hardwoods, softwoods, and man-made materials. The set consists of the drill body with five carbide cutting edges and one hardened-steel reamer insert. The cutting edges are overdrill cut for increased durability. Set screws provide positive cutter indexing.

The TIT bits are designed to cut tapered or straight slots in wood, plastics, and metal. They are ideal for slotting hinges and splines. The nominal width of the cutter is 1/8" (3.2mm).