Mayhew MY49001 Tools" Tools Plated Jimmy bar, 5/8"" x 19"""

JIMMY BAR PLATED 5/8 X 19

Mayhew MY49001 Tools" Tools Plated Jimmy bar, 5/8"" x 19"""

The JIMMY BAR is the perfect tool for removing and installing doors with hinges from 3/4" to 1-1/2" solid hardwood door frames.

Same as the MY49001 Tools" Tools Plated Jimmy bar, 5/8"" x 19"""

Count on Mayhew for all your tool and equipment needs. The Mayhew MY49001 Tools" Tools Plated Jimmy bar, 5/8"" x 19""" is the perfect addition to any collection of tools and equipment.

High visibility, overall length 19 in. x width 5/8 in. x thickness 1/4 in.

The Plated JIMMY bar allows you to quickly and accurately cut the proper length of nails from a wire coil or bulk nails (sold separately). Simply slide the bar into the coil, and then cut off an exact length of nails through the slot on one end. Two cutting edges provide maximum versatility. The long side is for cutting 7d, 8d, 9d common and ring shank nails up to 3/4"" in diameter; the short side is for cutting brads or small finish nails. Cut your next nail length just right with Mayhew's JIMMY bar.

MAYHEW MY49001

"Myers Mayhew Tools MY49001 Jimmy bar, 5/8"" x 19"""

Mayhew's MY49001 Jimmy Bar Plated 5/8" x 19". Features: - For use in breaking concrete, ceramic tile, brick and masonry.- Crafted from high quality steel with a hard chrome plated finish.- Note: Not for use with a splitter bar or as a drift pin.

Midstate Tool & Supply

JIMMY BAR PLATED 5/8 X 19

Mayhew MY49001 Tools" Tools Plated Jimmy bar, 5/8"" x 19"""

The JIMMY BAR is the perfect tool for removing and installing doors with hinges from 3/4" to 1-1/2" solid hardwood door frames.

Same as the MY49001 Tools" Tools Plated Jimmy bar, 5/8"" x 19"""

Count on Mayhew for all your tool and equipment needs. The Mayhew MY49001 Tools" Tools Plated Jimmy bar, 5/8"" x 19""" is the perfect addition to any collection of tools and equipment.

High visibility, overall length 19 in. x width 5/8 in. x thickness 1/4 in.

The Plated JIMMY bar allows you to quickly and accurately cut the proper length of nails from a wire coil or bulk nails (sold separately). Simply slide the bar into the coil, and then cut off an exact length of nails through the slot on one end. Two cutting edges provide maximum versatility. The long side is for cutting 7d, 8d, 9d common and ring shank nails up to 3/4"" in diameter; the short side is for cutting brads or small finish nails. Cut your next nail length just right with Mayhew's JIMMY bar.

MAYHEW MY49001

"Myers Mayhew Tools MY49001 Jimmy bar, 5/8"" x 19"""

Mayhew's MY49001 Jimmy Bar Plated 5/8" x 19". Features: - For use in breaking concrete, ceramic tile, brick and masonry.- Crafted from high quality steel with a hard chrome plated finish.- Note: Not for use with a splitter bar or as a drift pin.

Midstate Tool & Supply