ARMATURE ASSEMBLY
MAKITA PARTS MP515611-3 ARMATURE ASSEMBLY
The MAKITA ARMATURE ASSEMBLY, 110 VOLT, 1.4 AMP is designed for use with part number 535699-3.
The Armature Assembly is a genuine Makita replacement part. Designed to work with MP5000Z, MP5000ZB, MP5000Z1, MP5000Z2, and MP5000Z4 "Z" series 5-Inch Random Orbit Sander/Polishers. The Armature Assembly has a larger diameter which holds a 10mm exit point buffing pad that allows for faster removal of material from your work piece.
The armature assembly is used for string trimmer, brush cutter, pole saw and Yard Vacuum.
The Armature Assembly of a Die Grinder is the power producing part of the tool. It carries an electric current from a power source to a cutting wheel or grinding stone/cup, which then does the work. This part is made of iron and is equipped with insulated wire leads that connect it to a power source. The Armature Assembly of a Die Grinder has a magnetic steel core around which a rotating armature of wires or coils is wound. The wire forming the armature is covered with insulation on both ends and each end connects with either one or two brushes, depending on the design. A metal base houses the
The armature assembly is designed for industrial and commercial use. It is not for household or automotive applications.
This is an aftermarket replacement part.
This part fits many generator models-Fits Model
Numbers: DGA450, DGA550, DGA650, DGE610. And
Models: WG700, WG740, WGA750,
For easy home replacement
This part will fit on the following tools.
The 9.6 volt Makita XPH012 cordless tool battery is shipped in a discharged condition and must be charged before use (contact your dealer for charging instructions). Upon initial use (or after a prolonged storage period) the battery may require two to three charge/discharge cycles before achieving maximum capacity.
ARMATURE ASSEMBLY
MAKITA PARTS MP515611-3 ARMATURE ASSEMBLY
The MAKITA ARMATURE ASSEMBLY, 110 VOLT, 1.4 AMP is designed for use with part number 535699-3.
The Armature Assembly is a genuine Makita replacement part. Designed to work with MP5000Z, MP5000ZB, MP5000Z1, MP5000Z2, and MP5000Z4 "Z" series 5-Inch Random Orbit Sander/Polishers. The Armature Assembly has a larger diameter which holds a 10mm exit point buffing pad that allows for faster removal of material from your work piece.
The armature assembly is used for string trimmer, brush cutter, pole saw and Yard Vacuum.
The Armature Assembly of a Die Grinder is the power producing part of the tool. It carries an electric current from a power source to a cutting wheel or grinding stone/cup, which then does the work. This part is made of iron and is equipped with insulated wire leads that connect it to a power source. The Armature Assembly of a Die Grinder has a magnetic steel core around which a rotating armature of wires or coils is wound. The wire forming the armature is covered with insulation on both ends and each end connects with either one or two brushes, depending on the design. A metal base houses the
The armature assembly is designed for industrial and commercial use. It is not for household or automotive applications.
This is an aftermarket replacement part.
This part fits many generator models-Fits Model
Numbers: DGA450, DGA550, DGA650, DGE610. And
Models: WG700, WG740, WGA750,
For easy home replacement
This part will fit on the following tools.
The 9.6 volt Makita XPH012 cordless tool battery is shipped in a discharged condition and must be charged before use (contact your dealer for charging instructions). Upon initial use (or after a prolonged storage period) the battery may require two to three charge/discharge cycles before achieving maximum capacity.
Free Shipping
In stock
