Uni-Tab Adapter for Stud Guns
Have a stud gun that just isn't getting the job done? While adding a stud shooter can bring you hours of enjoyment, it's not always an easy task. It's complicated, time consuming, and requires a lot of special prep work: A tall order for those of us who don't do carpentry as our full time job. The HSA1063 Uni-Tab Adapter for Stud Guns changes all of that.
H & S Autoshot HSA1063 Uni-Tab Adapter for Stud Guns is one of the best choice in auto body tools. It save your time on replacing or removing factory spot welds from steel body panels. It can be used with electric stud guns without an air hose, which makes it more portable and easier to handle than regular stud guns. The design is totally based on the existing Tungsten Electrodes by replacing the paste tip with a steel point. It leaves no slag after removing spot welds.
The Uni-Tab Adapter is designed to fit all H&S Stud Guns. It allows you to attach and remove the drill bit on any of the guns without changing the angle of the uni-tab adapter or having to make an unnecessary notch in your workpiece.
The H&S Autoshot HSA1063 Uni-Tab Adapter fits with both Stud guns and Tag Guns, and allows to fit a torch head on both ends. The Uni-Tab also works with most other brands of torch heads as well.
The Uni-Tab welds to a Stud Gun easily by inserting the Stud Gun into the female end of the Uni-Tab and then twist locking it in place. The Uni-Tab then can be clamped or slipped over your male threaded pipe to create a connection between your Stud Gun and Pipe.
The Autoshot HSA1063 Uni-Tab Adapter easily screws onto any 3/8" or 1/2" stud gun with a standard tapered screw thread. The double swiveling adapter allows the gun to rotate around a center point and lock into place for ease of use.
Autoshot HSA1063 Uni-tab Stud Gun Adapter is for shotcrete, lightweight concrete, mortar and grout injection applications. This uni-tab adapter is designed to fit the following manufacturers' shot guns:
Uni-Tab Adapter for Stud Guns
Have a stud gun that just isn't getting the job done? While adding a stud shooter can bring you hours of enjoyment, it's not always an easy task. It's complicated, time consuming, and requires a lot of special prep work: A tall order for those of us who don't do carpentry as our full time job. The HSA1063 Uni-Tab Adapter for Stud Guns changes all of that.
H & S Autoshot HSA1063 Uni-Tab Adapter for Stud Guns is one of the best choice in auto body tools. It save your time on replacing or removing factory spot welds from steel body panels. It can be used with electric stud guns without an air hose, which makes it more portable and easier to handle than regular stud guns. The design is totally based on the existing Tungsten Electrodes by replacing the paste tip with a steel point. It leaves no slag after removing spot welds.
The Uni-Tab Adapter is designed to fit all H&S Stud Guns. It allows you to attach and remove the drill bit on any of the guns without changing the angle of the uni-tab adapter or having to make an unnecessary notch in your workpiece.
The H&S Autoshot HSA1063 Uni-Tab Adapter fits with both Stud guns and Tag Guns, and allows to fit a torch head on both ends. The Uni-Tab also works with most other brands of torch heads as well.
The Uni-Tab welds to a Stud Gun easily by inserting the Stud Gun into the female end of the Uni-Tab and then twist locking it in place. The Uni-Tab then can be clamped or slipped over your male threaded pipe to create a connection between your Stud Gun and Pipe.
The Autoshot HSA1063 Uni-Tab Adapter easily screws onto any 3/8" or 1/2" stud gun with a standard tapered screw thread. The double swiveling adapter allows the gun to rotate around a center point and lock into place for ease of use.
Autoshot HSA1063 Uni-tab Stud Gun Adapter is for shotcrete, lightweight concrete, mortar and grout injection applications. This uni-tab adapter is designed to fit the following manufacturers' shot guns:
Free Shipping
