Fluke FLUAC89 AC89 Heavy Duty Insulation Piercing Test Clip, 1000V Voltage, 5A Current

PROBE INSUL PIERCING

The Fluke AC-89AN insulation piercing test clip is well-suited to locate and observe energized metal surfaces, as well as make contact with them. The insulation piercing tip allows for easy probing of non-insulated wiring, and the voltage rating indicates that it can be used with 1000 V AC.``

The Fluke AC89 insulation piercing test clip allows you to easily start an insulation piercing measurement on power lines, ground wires, extension cords, cables and more. This heavy-duty clip is designed to give you maximum reliability and confidence when you work in tough environments. Features: * 1000V voltage continuity test (1000VAC/ 1500VDC) * 5A current test * for 2.5mm-10mm cord insulation * spring is convenient for indoor & outdoor use **

The Fluke FLUAC89 AC insulation piercing test clip allows you to easily pierce and measure insulation of appliances, motor control centers, and fluorescent lights. It features a 5A maximum voltage and 1000V voltage, a red LED head light that illuminates up to 6 inches in front of the device, and a non-slip handle. The magnetic tip makes it easy to retrieve probes that are lost in the insulation.

The Fluke AC89 insulation piercing test clip gives you the convenience of a cordless tool, and is designed for work with metal and nonmetal materials. It has an output voltage of 1000V, and can penetrate 1/4" or more insulation with AC7 rated inserts.

The Fluke AC89 is the first insulation piercing test clip with 1000V voltage and 5A current capability. This probe can handle any electrical insulation test or problem you may have in the field. The pins on the AC89 are positioned at different angles to provide a quicker, more accurate pin depth determination.

The Fluke AC89 insulation piercing test clip is a full-featured, heavy duty insulated-tip AC voltage tester designed to withstand high electrical and mechanical shock hazards. With 1000V, 20 amps of tested capacity, and 10kV isolation rating, the Fluke AC89 provides both versatility and safety for professionals working in tough environments. It has a full-size 1/4" insulation piercing probe that enables the tester to check continuity on live circuits without damaging the insulation. The full

Fluke AC89 Insulation Piercing Test Clip with Polycarbonate Tip, High Temperature Connection Cable with Hi-Lift Allows Use in Overhead Conduit and a Heavy-Duty Rubber Boot. The Fluke AC89 insulation piercing test clip interfaces directly with any meter that uses a 1,000V (1kV) or 2,250V (2.25kV) alligator clamp. It features a hi-lift, polycarbonate tip and heavy-duty rubber boot for

PROBE INSUL PIERCING

The Fluke AC-89AN insulation piercing test clip is well-suited to locate and observe energized metal surfaces, as well as make contact with them. The insulation piercing tip allows for easy probing of non-insulated wiring, and the voltage rating indicates that it can be used with 1000 V AC.``

The Fluke AC89 insulation piercing test clip allows you to easily start an insulation piercing measurement on power lines, ground wires, extension cords, cables and more. This heavy-duty clip is designed to give you maximum reliability and confidence when you work in tough environments. Features: * 1000V voltage continuity test (1000VAC/ 1500VDC) * 5A current test * for 2.5mm-10mm cord insulation * spring is convenient for indoor & outdoor use **

The Fluke FLUAC89 AC insulation piercing test clip allows you to easily pierce and measure insulation of appliances, motor control centers, and fluorescent lights. It features a 5A maximum voltage and 1000V voltage, a red LED head light that illuminates up to 6 inches in front of the device, and a non-slip handle. The magnetic tip makes it easy to retrieve probes that are lost in the insulation.

The Fluke AC89 insulation piercing test clip gives you the convenience of a cordless tool, and is designed for work with metal and nonmetal materials. It has an output voltage of 1000V, and can penetrate 1/4" or more insulation with AC7 rated inserts.

The Fluke AC89 is the first insulation piercing test clip with 1000V voltage and 5A current capability. This probe can handle any electrical insulation test or problem you may have in the field. The pins on the AC89 are positioned at different angles to provide a quicker, more accurate pin depth determination.

The Fluke AC89 insulation piercing test clip is a full-featured, heavy duty insulated-tip AC voltage tester designed to withstand high electrical and mechanical shock hazards. With 1000V, 20 amps of tested capacity, and 10kV isolation rating, the Fluke AC89 provides both versatility and safety for professionals working in tough environments. It has a full-size 1/4" insulation piercing probe that enables the tester to check continuity on live circuits without damaging the insulation. The full

Fluke AC89 Insulation Piercing Test Clip with Polycarbonate Tip, High Temperature Connection Cable with Hi-Lift Allows Use in Overhead Conduit and a Heavy-Duty Rubber Boot. The Fluke AC89 insulation piercing test clip interfaces directly with any meter that uses a 1,000V (1kV) or 2,250V (2.25kV) alligator clamp. It features a hi-lift, polycarbonate tip and heavy-duty rubber boot for